Reference DFNT ♦ ProLinx Gateway
Protocol Manual EtherNet/IP Explicit Messaging Client/Server
Page 78 of 124 ProSoft Technology, Inc.
July 24, 2013
5.2.9 Function Code #150 - Word Range Write (PLC-5 Command)
(ASCII Address)
0=Disabled, 1=Continuous and 2=Conditional.
This parameter defines the database address of the first
data point to be associated with the command.
Minimum time in tenths of a second to wait before
polling with this command.
Number of data word values to be considered by the
function.
Swap type code for command: 0=None, 1=Swap words,
2=Swap words & bytes and 3=swap bytes in each word.
Address of unit to reach on the data highway.
Processor slot number in Control/CompactLogix rack.
Use -1 for PLC5 & SLC processors.
Word Range Write Command.
PLC-5 address as specified as an ASCII string. For
example, N10:300.
These fields are not used by the command. Values
entered in these columns will be ignored.
This function writes one or more words of data to a PLC data table. This function
should work on the following devices: PLC-5.
5.2.10 Function Code #151 - Word Range Read (PLC-5 Command)
(ASCII Address)
0=Disabled and 1=Continuous.
This parameter defines the database address of the first
data point to be associated with the command.
Minimum time in tenths of a second to wait before
polling with this command.
Number of data word values to be considered by the
function.
Swap type code for command: 0=None, 1=Swap words,
2=Swap words & bytes and 3=swap bytes in each word.
Address of unit to reach on the data highway.
Processor slot number in Control/CompactLogix rack.
Use -1 for PLC5 & SLC processors.
PLC-5 address as specified as an ASCII string. For
example, N10:300.
These fields are not used by the command. Values
entered in these columns will be ignored.
This function reads one or more words of data from a PLC data table. This
function should work on the following devices: PLC-5.
Comments to this Manuals