ProSoft Technology ProLinx S3964R User Manual download pdf (Page 12)

MVI69-S3964R ♦ CompactLogix or MicroLogix Platform Start Here

Siemens 3964R Protocol

Page 12 of 80 ProSoft Technology, Inc.

October 31, 2008

3 Click to open the Utilities folder. This folder contains all of the applications

and files you will need to set up and configure your module.

4 Double-click the ProSoft Configuration Builder Setup program and follow the

instructions on your screen to install the software on your PC.

Note: Many of the configuration and maintenance procedures use files and other utilities on the

CD-ROM. You may wish to copy the files from the Utilities folder on the CD-ROM to a convenient

location on your hard drive.

1.4 Setting Jumpers

When the module is manufactured, the port selection jumpers are set to RS-232.

To use RS-422 or RS-485, you must set the jumpers to the correct position. The

following diagram describes the jumper settings.

The Setup Jumper acts as "write protection" for the module's flash memory. In

"write protected" mode, the Setup pins are not connected, and the module's

firmware cannot be overwritten. Do not jumper the Setup pins together unless

you are directed to do so by ProSoft Technical Support.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 79 80

No comments

ProSoft Technology ProLinx S3964R User Manual Page 12