ProSoft Technology ProLinx S3964R User Manual download pdf (Page 2)

Please Read This Notice

Successful application of this module requires a reasonable working knowledge of the Rockwell Automation

CompactLogix or MicroLogix hardware, the MVI69-S3964R Module and the application in which the combination is to

be used. For this reason, it is important that those responsible for implementation satisfy themselves that the

combination will meet the needs of the application without exposing personnel or equipment to unsafe or

inappropriate working conditions.

This manual is provided to assist the user. Every attempt has been made to ensure that the information provided is

accurate and a true reflection of the product's installation requirements. In order to ensure a complete understanding

of the operation of the product, the user should read all applicable Rockwell Automation documentation on the

operation of the Rockwell Automation hardware.

Under no conditions will ProSoft Technology be responsible or liable for indirect or consequential damages resulting

from the use or application of the product.

Reproduction of the contents of this manual, in whole or in part, without written permission from ProSoft Technology

is prohibited.

Information in this manual is subject to change without notice and does not represent a commitment on the part of

ProSoft Technology Improvements and/or changes in this manual or the product may be made at any time. These

changes will be made periodically to correct technical inaccuracies or typographical errors.

Battery Life Advisory

All modules in the MVI series use a rechargeable Lithium Vanadium Pentoxide battery to backup the 512K SRAM

memory, real-time clock, and CMOS. The battery should last for the life of the module.

The module must be powered for approximately twenty hours before it becomes fully charged. After it is fully charged,

the battery provides backup power for the CMOS setup and configuration data, the real-time clock, and the 512K

SRAM memory for approximately 21 days.

Before you remove a module from its power source, ensure that the battery within the module is fully charged. A fully

charged battery will hold the BIOS settings (after being removed from its power source) for a limited number of days.

When the battery is fully discharged, the module will revert to the default BIOS settings.

Note: The battery is not user replaceable.

Your Feedback Please

We always want you to feel that you made the right decision to use our products. If you have suggestions, comments,

compliments or complaints about the product, documentation or support, please write or call us.

ProSoft Technology

1675 Chester Avenue, Fourth Floor

Bakersfield, CA 93301

+1 (661) 716-5100

+1 (661) 716-5101 (Fax)

http://www.prosoft-technology.com

MVI69-S3964R User Manual

10/31/2008

ProSoft Technology ®, ProLinx ®, inRAx ®, ProTalk® and RadioLinx ® are Registered Trademarks of ProSoft

Technology, Inc.

1 2 3 4 5 6 7 ... 79 80

No comments

ProSoft Technology ProLinx S3964R User Manual Page 2