Prosoft-technology 5201-DFNT-104S User Manual Page 2
- Page / 157
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Important Installation Instructions
Power, Input, and Output (I/O) wiring must be in accordance with Class I, Division 2 wiring methods, Article 501-4 (b)
of the National Electrical Code, NFPA 70 for installation in the U.S., or as specified in Section 18-1J2 of the Canadian
Electrical Code for installations in Canada, and in accordance with the authority having jurisdiction. The following
warnings must be heeded:
A WARNING - EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR
CLASS I, DIV. 2;
B WARNING - EXPLOSION HAZARD - WHEN IN HAZARDOUS LOCATIONS, TURN OFF POWER BEFORE
REPLACING OR WIRING MODULES
C WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT UNLESS POWER HAS BEEN
SWITCHED OFF OR THE AREA IS KNOWN TO BE NONHAZARDOUS.
D THIS DEVICE SHALL BE POWERED BY CLASS 2 OUTPUTS ONLY.
All ProLinx
®
Products
WARNING – EXPLOSION HAZARD – DO NOT DISCONNECT EQUIPMENT UNLESS POWER HAS BEEN
SWITCHED OFF OR THE AREA IS KNOWN TO BE NON-HAZARDOUS.
AVERTISSEMENT – RISQUE D'EXPLOSION – AVANT DE DÉCONNECTER L'EQUIPMENT, COUPER LE
COURANT OU S'ASSURER QUE L'EMPLACEMENT EST DÉSIGNÉ NON DANGEREUX.
Markings
UL/cUL ISA 12.12.01 Class I, Div 2 Groups A, B, C, D
cUL C22.2 No. 213-M1987
243333 183151
CL I Div 2 GPs A, B, C, D
Temp Code T5
II 3 G
Ex nA nL IIC T5 X
0° C <= Ta <= 60° C
II – Equipment intended for above ground use (not for use in mines).
3 – Category 3 equipment, investigated for normal operation only.
G – Equipment protected against explosive gasses.
ProLinx Gateways with Ethernet Ports
Series C ProLinx™ Gateways with Ethernet ports do NOT include the HTML Web Server. The HTML Web Server
must be ordered as an option. This option requires a factory-installed hardware addition. The HTML Web Server now
supports:
8 MB file storage for HTML files and associated graphics files (previously limited to 384K)
32K maximum HTML page size (previously limited to 16K)
To upgrade a previously purchased Series C model:
Contact your ProSoft Technology distributor to order the upgrade and obtain a Returned Merchandise Authorization
(RMA) to return the unit to ProSoft Technology.
- 104S v2 1
- All ProLinx 2
- Products 2
- Your Feedback Please 3
- ProSoft Technology 3
- Product Documentation 3
- Contents 5
- 1 Start Here 9
- 1.2.1 Using the Online Help 10
- 2 Configure the Gateway 13
- 2.1.1 [SNTP CLIENT] 14
- 2.1.2 [IEC-870-5-104] 16
- O (0) or YES (1) 17
- ES or NO 20
- or more 21
- ONE, 1 = CP24, or 2 = CP56 23
- ES or NO 27
- 2.1.5 [M_SP_NA_1 104] 29
- 2.1.6 [M_DP_NA_1 104] 30
- 2.1.7 [M_ST_NA_1 104] 30
- 2.1.8 [M_ME_NA_1 104] 30
- 2.1.9 [M_ME_NB_1 104] 31
- 2.1.10 [M_ME_NC_1 104] 31
- 2.1.11 [M_IT_NA_1 104] 32
- 2.1.12 [C_SC_NA_1 104] 32
- 2.1.13 [C_DC_NA_1 104] 33
- 2.1.14 [C_RC_NA_1 104] 33
- 2.1.15 [C_SE_NA_1 104] 34
- 2.1.16 [C_SE_NB_1 104] 34
- 2.1.17 [C_SE_NC_1 104] 35
- 2.1.18 Group Codes 36
- 2.2 CommonNet Data Map 38
- 2.2.1 From Address 39
- 2.2.2 To Address 39
- 2.2.3 Register Count 39
- 2.2.4 Swap Code 39
- 2.2.5 Delay Preset 40
- OWNLOAD dialog box opens 41
- OWNLOAD button 41
- Implementation 43
- 3.1 Module Address 44
- 3.1.1 IP Address 44
- 3.1.2 Common ASDU Address 46
- 3.3 Using Monitor Points 49
- 3.3.1 Monitor Data Transfer 50
- Example - Mode A 54
- D 03/26/2004 00:00:00 55
- H 03/25/2004 19:00:00 55
- M 03/25/2004 18:08:00 55
- Example (C_SC_NA) 63
- 3.4.1 Control Data Transfer 64
- 3.5 Data Communication 70
- 3.5.1 Group Communication 70
- 3.5.2 STARTDT & STOPDT 72
- 3.5.3 TESTFR Requests 73
- 3.6 Events 75
- 3.6.1 Deadbands 76
- Example: 78
- 3.6.3 Time Information 83
- CHECK DELAY TIME 84
- 3.6.5 Event Priority 87
- 3.6.6 SNTP Support 88
- 3.7 Sequence Flag 89
- 4.1.1 Required Hardware 91
- IAGNOSTICS 92
- IAGNOSTICS dialog box 92
- to open the Main Menu 93
- 4.1.3 Navigation 94
- 4.1.4 Database View Menu 97
- to open the IEC-870-5-104 100
- 4.1.6 Network Menu 102
- to return to the Main Menu 103
- 4.2 LED Indicators 104
- 5 Reference 105
- 5.2.1 Introduction 109
- 5.2.2 Configuration 109
- Word Offset Description 110
- 5.2.3 Command Block List 111
- 5.3 SNTP Support 123
- 5.3.1 SNTP Status Data 123
- 5.5 Command Qualifiers 126
- 5.6 Parameter Qualifiers 127
- 5.7.1 System or device 128
- 5.7.2 Application Layer 128
- In This Chapter 138
- Monitor Database 143
- Address 143
- Require Select 143
- 5.8.4 C_RC_NA_1 Form 145
- 6.2.1 All Product Returns: 148
- 6.3 LIMITED WARRANTY 150
- 6.3.8 No Other Warranties 153
- 6.3.9 Allocation of Risks 153
Related products and manuals for Relay Prosoft-technology 5201-DFNT-104S
Relay Prosoft-technology AN-X-PB User Manual
(61 pages)
(61 pages)
© 2020, manymanuals.com. All rights reserved. | 0.763 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals