ProSoft Technology RLXIC-EH User Manual Page 47
- Page / 111
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Data Communication and Host Modes RLXIC-EH ♦ Intelligent Cellular
User Manual RadioLinx Intelligent Cellular Ethernet Gateway for HSUPA (3G GSM) Networks
ProSoft Technology, Inc. Page 47 of 111
May 29, 2009
7 Data Communication and Host Modes
In This Chapter
Basic Modes..........................................................................................48
Serial Modes .........................................................................................49
Data Communication.............................................................................53
Keepalive...............................................................................................58
Note: This section describes general communication options for the RLXIC-EH. For specific
information regarding configuration of the RLXIC-EH for different industrial applications, refer to the
application notes and templates on the RadioLinx CD.
The RLXIC-EH plays the part of a HOST when a computer or another device is
connected directly to its port, and routes data to/from the connected device to the
cellular network.
Caution: The RLXIC-EH moves data from one port to the cellular network in a simple one-to-one
routing. It does not employ a routing table or any complicated routing protocol.
Tip: If you need to have one-to-many routing, you can connect the RLXIC-EH to a router. The
router would provide the multiple routing, and the RLXIC-EH would provide one-to-one for the
router to the cellular network and the Internet.
As the host, the RLXIC-EH can use different communication modes:
7.1.1 Basic Modes
AT: The RLXIC-EH accepts and responds to standard AT commands.
PassThru: Direct connection to internal hardware (OEM Module) of the
RLXIC-EH.
Telnet: The RLXIC-EH auto-answers TCP connections to allow terminal
emulation using either a local USB Ethernet connection or remotely using the
cellular connection.
Tip: By default, the RLXIC-EH is in AT Mode, and allows AT Commands to be entered via terminal
connection (through the local port connection) or remotely (through the cellular network). PassThru
Mode can only be exited by resetting the RLXIC-EH. All serial modes are entered by use of a
startup mode command.
7.1.2 Serial Modes
PPP Mode: The RLXIC-EH uses PPP to communicate with a device or
computer connected to the serial or USB port.
SLIP Mode: The RLXIC-EH uses SLIP to communicate with a device or
computer connected to the serial or USB port.
- RLXIC-EH 1
- Important Notice 2
- Safety and Hazards 2
- Limitation of Liability 2
- Patents 3
- Your Feedback Please 3
- Contents 5
- 1.1 ALEOS™ 8
- 1.2 AceWare™ 8
- 1.2.1 Modem Doctor 9
- 1.4 GSM Communication 11
- 2 Specifications 13
- 2.2 Power Connector 15
- 3.1 Installing the SIM 17
- 3.1.1 Before you start 17
- 3.1.2 Opening the Case 18
- 3.1.4 Insert the SIM 18
- 3.2 Configuring the APN 19
- 3.2.1 Start AceManager 19
- 3.2.2 Connect to the Modem 20
- 3.2.3 Enter the APN 20
- 4.1 Connecting to Power 22
- 4.3 Indicator Lights 23
- 4.3.1 RSSI LED Ranges 24
- 4.3.2 Light Patterns 24
- 4.4 Mounting 24
- 4.5 Connecting Antennas 26
- 5 Configuring your RLXIC-EH 27
- 5.1 Using AceManager 28
- 5.1.1 Start AceManager 28
- ALUE column 29
- 5.2 Using Templates 30
- OAD button on the toolbar 31
- EMPLATE 33
- ADIOLINX 34
- 5.3.1 AT Commands 36
- 6.2.1 Set the Port Type 38
- TART > CONTROL PANEL 40
- YSTEM icon 40
- ETWORK ADAPTERS 41
- in front of MODEMS 42
- 2332 by default) 45
- Utility 46
- 7.1.1 Basic Modes 47
- 7.1.2 Serial Modes 47
- 7.1.3 Data Communication 48
- 7.2 Basic Modes 48
- 7.2.1 AT Mode 48
- 7.3 Serial Modes 49
- 7.3.1 PPP 49
- 7.3.2 SLIP 50
- 7.3.3 UDP Auto Answer 51
- 7.3.4 TCP and TCP Pad 52
- 7.3.5 Hybrid Mode 53
- 7.4 Data Communication 53
- 7.4.2 Basic Routing 55
- 7.5 Keepalive 58
- 7.5.1 Configuring Keepalive 59
- 8 IP Manager 61
- 8.3 Dynamic Names 63
- 10 16992 bytes 64
- 30 5664 bytes 64
- 60 2832 bytes 64
- 500 339.84 bytes 64
- 8.4.2 Eairlink.com 65
- 8.5 Understanding DNS 65
- 8.5.1 Configuring DNS 65
- 9.1.2 SNMP Traps 67
- 9.2 SNMP Configuration 68
- 9.2.1 Listening Port 68
- 9.2.2 Security Level 68
- 9.2.4 Trap Destination 69
- 9.2.5 Community String 69
- 9.3.1 Display Responses 73
- 9.3.2 Product ID 73
- 10 Configuration Commands 75
- 10.2 Status 77
- 10.3 Common 79
- 10.3.1 Misc (Miscellaneous) 79
- 10.3.2 DNS 84
- 10.3.3 Dynamic IP 85
- 10.3.4 PPP/Ethernet 87
- 10.3.5 SMTP 89
- 354 = send in progress 90
- 250 = sent ok 90
- 10.3.6 Other 91
- 10.3.7 Firewall 94
- 10.3.8 Port Forwarding 96
- 10.4 Logging 97
- 10.5 Cellular 99
- In This Chapter 101
- 11.2.1 All Product Returns: 102
- 11.3 LIMITED WARRANTY 103
- 11.3.8 No Other Warranties 107
- 11.3.9 Allocation of Risks 107
Related products and manuals for Gateways/controllers ProSoft Technology RLXIC-EH
(14 pages)© 2020, manymanuals.com. All rights reserved. | 1.572 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals