ProSoft Technology RLXIC-EH User Manual download pdf (Page 77)

Configuration Commands RLXIC-EH ♦ Intelligent Cellular

User Manual RadioLinx Intelligent Cellular Ethernet Gateway for HSUPA (3G GSM) Networks

ProSoft Technology, Inc. Page 77 of 111

May 29, 2009

10.2 Status

Most of the commands in the "Status" group have read-only parameters, and

provide information about the modem. The Status Group has more fields that can

be displayed on most screens. You can either resize your window or use the

scroll bar on the side to display the remainder.

*NETIP?

Note: If there is no current network IP address, 0.0.0.0 may be displayed.

The current IP address of the modem reported by the internal module, generally

obtained from your cellular provider. This is the address can contact the RLXIC-

EH from the Internet.

Tip: Use *NETALLOWZEROIP if you need to allow the display of an IP ending in a zero.

*NETSTATE?

The current network state:

 Connecting To Network: The RLXIC-EH is in the process of trying to

connect to the cellular network.

 Network Authentication Fail: Authentication to the cellular network has

failed. Verify settings to activate the RLXIC-EH.

 Data Connection Failed: The RLXIC-EH failed to connect, and it is now

waiting a set time interval before it attempts to reconnect. Verify settings to

activate the RLXIC-EH.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 110 111

No comments

ProSoft Technology RLXIC-EH User Manual Page 77