ProSoft Technology ProLinx S3964R User Manual download pdf (Page 25)

Module Configuration MVI46-S3964R ♦ SLC Platform

Siemens 3964R Protocol

ProSoft Technology, Inc. Page 25 of 74

This parameter assigns a name to the module that can be viewed using the

configuration/debug port. Use this parameter to identify the module and the

configuration file.

2.4 [Backplane 46]

This section identifies the method of failure for the communications for the

module if the processor is not in run.

The following example shows a sample [Backplane Configuration] section:

[Backplane 46]

Backplane Fail Count : 10 #Number of consecutive backplane transfer failures

# before halting communications

2.4.1 Backplane Fail Count

0 to 65535

This parameter specifies the number of consecutive backplane transfer failures

that can occur before communications should be halted.

2.5 [3964R Port x]

# This section is used to define the port 1 configuration for the 3964R device

[3964R Port 1]

Enable : Yes #No=Port Disabled,Yes=Port Enabled

Baud Rate : 9600 #Baud rate for port (300, 600, 1200, 2400, 4800,

#9600, 19200, 38400, 57600, 115)

Parity : Even #N=None,O=Odd,E=Even

Data Bits : 8 #7 or 8 data bits for messages

Stop Bits : 1 #1 or 2 stop bits for messages

RTS On : 0 #Delay after RTS set before message sent (mSec)

RTS Off : 0 #Delay after message before RTS dropped (mSec)

Minimum Response Delay: 0 #Delay before responding to CP

Use CTS Line : No #Monitor CTS modem line (Y/N)

Swap : 1 #0=No Data Byte Swapping, 1=Data Byte Swapping

Priority : 0 #0=High Priority, 1=Low Priority

Protocol : 0 #0=3964 RK512, 1=3964

ACK Delay : 1000 #Number of mSec to wait for ACK (Default 1000ms)

Setup Attempts : 6 #Number of times to try to connect to CP

#(Default 6)

Transmit Attempts : 6 #Number of times to try to transmit to CP

#(Default 6)

2.5.1 Enable

Yes or No

This parameter specifies whether to enable or disable the port. No = Port

Disabled, Yes = Port Enabled.

April 17, 2008

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 73 74

Comments to this Manuals

No comments

ProSoft Technology ProLinx S3964R User Manual Page 25

Comments to this Manuals

Related products and manuals for Gateways/controllers ProSoft Technology ProLinx S3964R