ProSoft Technology RLXIC-EH User Manual download pdf (Page 23)

Hardware Installation of the RLXIC-EV RLXIC-EV ♦ Intelligent Cellular

User Manual RadioLinx® Intelligent Cellular Ethernet Gateway for Verizon

ProSoft Technology, Inc. Page 23 of 104

March 10, 2010

4.1 Connecting to Power

This I/O port handles external input and output events. An external device can

send digital input to the modem, through the digital I/O port.

Your RLXIC-EV can be used with either DC or AC, with the appropriate power

adapter. DC cables and AC adapters are available as optional accessories in

addition to the one included with your RLXIC-EV.

The color wires are:

 BLACK (2 conductor) = Ground

 RED (1 conductor) = Power

Note: When using a DC power source (such as a solar cell), ProSoft Technology recommends

placing a fuse (1-2 Amp) on the line close to the power source to protect your power source from

possible surges due to shorts or other line issues.

The DC power cable positive lead should be connected to the battery or power

source positive terminal. The power cable negative lead should be connected to

the battery or power source negative terminal.

Tip: The DC power cable has a white wire lead in addition to the power positive and negative. This

is for a feature not present in the RLXIC line modems. In the RLXIC-EV, the white wire lead has no

function and can be ignored.

Warning: Explosion Hazard - Do not disconnect equipment unless power has been switched off or

the area is known to be non-hazardous.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 103 104

No comments

ProSoft Technology RLXIC-EH User Manual Page 23