ProSoft Technology RLXIC-EH User Manual Page 77

  • Download
  • Add to my manuals
  • Print
  • Page
    / 104
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 76
Configuring your RLXIC-EV RLXIC-EV Intelligent Cellular
User Manual RadioLinx® Intelligent Cellular Ethernet Gateway for Verizon
ProSoft Technology, Inc. Page 77 of 104
March 10, 2010
2 Once you have the Last incoming Phone number, that shows up on the SMS
screen in ACEmanager, note the exact phone number displayed.
3 Click on Add More to add a Trusted Phone Number.
Note: The Trusted Phone number can be 15 characters and has to be numbers only.
4 Enter the Last incoming Phone number as the Trusted Phone Number.
5 Click on Apply.
Note: Do not enter any extra digits and use the Last incoming displayed as a guide to type the
phone number. Use "1" only if it is used in the beginning of the Last incoming Phone number.
5.10.5 Telnet
The device can be connected to using the Telnet protocol. Once in a telnet
session with the device you can send AT commands.
The default telnet port is 2332. You can also change the Telnet timeout, if the
connection is idle, default 2 minutes. This is the internal telnet on the modem to
pass AT commands and not TCP pad.
Field AT Command Description
AT Telnet Port *TPORT
Sets or queries the port used for the AT Telnet server. If 0
is specified, the AT Telnet server will be disabled. The
default value is 2332.
n=0: Disabled.
n=1: 65535
Tip: Many networks have the ports below 1024 blocked. It
is recommended to use a higher numbered port.
AT Telnet Port
Timeout
(Minutes)
*TELNETTIMEOUT
Telnet port inactivity time out. By default, this value is set
to close the AT telnet connection if no data is received for
2 minutes.
n=minutes
Telnet Echo E Enable or disable toggle AT command echo mode.
Telnet Echo
Mode
S60
Page view 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 103 104

Comments to this Manuals

No comments