ProSoft Technology RLXIC-EH User Manual Page 48

  • Download
  • Add to my manuals
  • Print
  • Page
    / 104
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 47
RLXIC-EV Intelligent Cellular Configuring your RLXIC-EV
RadioLinx® Intelligent Cellular Ethernet Gateway for Verizon User Manual
Page 48 of 104 ProSoft Technology, Inc.
March 10, 2010
Field AT Command Description
Enable Over-
the-Air
Programming
OPRG
Enables/disables over-the-air firmware upgrading of the
RLXIC-EV. When ProSoft Technology releases a new
version of ALEOS, you can upgrade your remote
devices with Over-the-Air Programming (OPRG)
enabled.
Disables
Enables
5.7 LAN Configuration
The primary purpose of the RLXIC-EV is to route data from one or more devices
connected to one or more of the ports to the cellular network and, ultimately,
under most circumstances, to the Internet.
5.7.1 Public and Private Mode
To support some legacy installations, the RLXIC-EV has the ability to act as a
one-to-one gateway giving the cellular network granted IP address directly, to a
connected device. This is Public mode.
Since the one-to-one gateway configuration will not allow the flexibility of a LAN
environment where several devices can connect to the RLXIC-EV, Private Mode
provides a NAT environment with an optional DHCP server.
Tip: When using Public mode, ProSoft Technology recommends connecting the device directly to
the computer or other end device. Using a hub or switch may prevent the RLXIC-EV from updating
the IP address of the end device when an IP address is received from the cellular network.
In ACEmanager, the Host Public mode and DHCP settings are part of the LAN
tab. The DHCP addresses for USB/net are on LAN > USB page, the DHCP
addresses for the serial PPP are on the PPPoE page, and the DHCP addresses
for the Wi-Fi, as applicable, are on the Wi-Fi page.
Page view 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 103 104

Comments to this Manuals

No comments