ProSoft Technology RLXIC-EH User Manual Page 76

  • Download
  • Add to my manuals
  • Print
  • Page
    / 104
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 75
RLXIC-EV Intelligent Cellular Configuring your RLXIC-EV
RadioLinx® Intelligent Cellular Ethernet Gateway for Verizon User Manual
Page 76 of 104 ProSoft Technology, Inc.
March 10, 2010
The "PPP-Peer" Domain Name
The RLXIC-EV uses the unqualified domain name of "ppp-peer" when it is in
PPP or SLIP address mode to resolve the address of the device or computer
connected via PPP or SLIP address. If the RLXIC-EV is not in PPP or SLIP
address mode, "ppp-peer" will resolve to 0.0.0.0.
5.10.4 SMS
The ALEOS SMS feature allows some remote management of the RLXIC-EV
with SMS messaging. SMS allows users to control:
Current Status
Reset RLXIC-EV
Control up to two relays
When an SMS command is received from a pre-defined "Trusted" phone
number, the RLXIC-EV performs the action requested and sends a response
back to that same phone number.
SMS Command Device Action SMS Response
Note: All responses start with "reply from [modem name]:"
status None [Network IP] [Network Status]:
[technology type] RSSS [original]
reset
Resets the device
30 seconds after the
first response
message is sent.
First message: Reset in 30 seconds
Second message: Status message when back up.
relay x y
Sets the applicable
relay to the desired
setting.
relay x set to y
x can be 1 or 2
y can be 0 or 1
Warning: To use SMS with your RLXIC-EV, you will need an account with SMS enabled and your
carrier cannot block SMS for data accounts.
Follow the instructions below to add a Trusted Phone Number on the SMS page.
1 Send an SMS command to the device and hit Refresh. No maintenance
response will be sent to a number until it is defined as Trusted.
Page view 75
1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 103 104

Comments to this Manuals

No comments